 |
 |
General Specifications | |
| Sensor Type | Hall sensor |
| Over Pressure | 520bar*30 min |
| Burst Pressure | >1000bar |
| Testing Pressure | 0-400bar |
| Working Pressure | 0-200bar |
| Leakage Rate | <1/100,000 |
| Calibration | accuracy 1.6% F.S. |
| Working Temperature | -40~120?? |
| Durability | >80,000 cycles |
| Thread | 1/4"BSP, M14*1.5, M12*1.5 |
| Certification | ECE-R110 |
| Water Proof | IP66 |
| Body Material | SS304 |
Suffix | Input | Output | Remark |
| None | +5V | 40bar/4.0V~150bar/1.0V | 12KΩ deviding resistance |
| -12 | +12V | 40bar/4.0V~150bar/1.0V | 12KΩ deviding resistance |
| -F | +5V | 40bar/1.0V~150bar/4.0V | 10KΩ deviding resistance |
| -F2 | +12V | 40bar/1.0V~150bar/4.0V | 4.7KΩ deviding resistance |
| -F4 | +5V | 0bar/0.5V~260bar/4.5V | Export linear volt directly |
| -2.4 | +5V | 0bar/0.5~200bar/2.44V | Export linear volt directly |
| *Hall sensor and transmitter are volt output, dividing resistor is not required; | |||
The Hall type sensor has linerity output, accuracy of output is 2.5% and linerity rate is 1.6%, it has good capacity to anti vibration, supports digital switch.